KCB 18.3 83.3 portable explosion proof Gear Oil transfer pump for transfer diesel oil

KCB 18.3 83.3 portable explosion proof Gear Oil transfer pump for transfer diesel oil

Application Scope

• Various Lubricating oil: crude oil, diesel oil, lubricants, oil-type liquid.
• With copper gear can transmit low flash point liquid, such as gasoline, benzene.
• Using stainless steel can pump weak corrosive liquid and food beverage.
• Normally temperature of liquid should not be over 70 degree Celsius . If requested 300 C, we can make the anti high temperature oil pump for customers.
• It can give performance as transfer pump or booster pump in oil delivery system.
• It can be also applied as a fuel pump for delivery system,pressurization and injection in fuel supply system and in all industry fields as lubricating pump.

Advantages:

a. Coupled gear set with high quality carbon steel(2Cr 13 carbon steel as standard). Stainless steel or bronze material gear is available.

b. Each gear is fitted on a shaft supported by two internal quality bearings immersed in the pumped liquid. Small size in sliding bearing, to model KCB-83.3/0.33, big size in rolling bearing, from model KCB-135/0.33. There are no external bearings.

c. Pump has only one shaft penetration(the drive gear side) through the housing sealed with a mechanical seal. Soft packing seal is available.

e. Pumps are driven with electric motors through elastic coupling or spacer coupling.

f. With built-in relief valve, setting value 1.5 times of discharge pressure, to protect pump and pipe system.

g. Positive type pump, good self-priming function, suction head about 5 meter.

h. Self-lubrication, no need extra lub. oil or grease.

i. Both screw port, small size, to model KCB-83.3/0.33. Flange port, KCB-135/0.33, from model KCB-135/0.33.

Technical Parameters: